Tile Roofing

Soft washing is a low-pressure roof cleaning method that applies a cleaning solution — typically sodium-hypochlorite based with surfactants — to kill the algae, mildew and lichen that stain Southwest Florida roofs, instead of blasting the stains off with high pressure. The solution is applied at pressures comparable to a garden hose, the organisms die, and the staining weathers away over the following days and weeks. Soft washing is the industry-accepted method for concrete and clay tile because high-pressure washing erodes the tile surface, cracks tiles, and can drive water under laps. Because it kills the growth rather than just removing the visible staining, results generally last longer than pressure washing. It remains a cleaning method, not a repair: it does not address underlayment, flashing or tile damage.

For most Naples tile roofs, a professional inspection every couple of years is a sensible baseline, moving to annually as the roof ages past the midpoint of its expected life — plus an inspection after any significant wind event regardless of schedule. Southwest Florida conditions justify this cadence: near-daily summer storms find small vulnerabilities quickly, hurricane season raises the value of documented pre-storm condition, and the underlayment that determines a tile roof's real lifespan cannot be assessed from the ground. Between professional inspections, owners can watch from ground level for cracked or shifted tiles, debris accumulating in valleys, and any interior staining. What matters most is that inspections are documented with photos, so the roof's condition over time is a record rather than a memory.

Tile roof underlayment is the waterproof membrane installed over the plywood roof deck, beneath the tile. It is the layer that actually keeps the house dry: tile sheds most rainwater, but wind-driven rain and heavy Florida downpours routinely push some water past the tile, and the underlayment catches it and carries it to the eaves. Older Naples roofs commonly have felt-based underlayments — hot-mopped or mechanically fastened — which become brittle after decades of attic heat. Modern reroofs typically use self-adhered membranes or high-performance synthetics that resist heat aging better. Because the underlayment is the true waterproofing layer, its condition — not the appearance of the tile — is what determines whether a tile roof is near the end of its life.

Replace when the underlayment is broadly at the end of its life; repair when problems are localized. The telltale signs that favor replacement: leaks appearing in multiple unrelated areas, underlayment found brittle or torn wherever tiles are lifted, a history of repeated patch repairs, and decking deterioration in several locations. In that condition, each repair fixes one symptom of a system-wide failure, and the money is better directed at a reroof — often a lift-and-relay that reuses serviceable tile. Conversely, a roof leaking at one flashing or valley, with underlayment still pliable elsewhere, is a repair candidate regardless of its age. The determination requires lifting tiles in representative areas and, where accessible, inspecting the attic; it cannot be made honestly from the street. Craft Roofing documents these findings with photos so the recommendation rests on evidence.

Clay tile is fired ceramic; concrete tile is molded from sand, cement and pigment. Both are common in Naples and both perform well in Florida heat, but they differ in meaningful ways. Clay holds its color essentially permanently because the color is in or fired onto the ceramic, resists surface weathering, and is generally lighter but more brittle underfoot. Concrete tile costs less, comes in a wider range of profiles, and is tougher against impact, but its surface pigment and slurry coat weather over decades — the fading and increasing porosity visible on older Naples roofs — and it absorbs more water. Underneath either material, the roofing system is the same: underlayment does the waterproofing, and flashings, valleys and vents do the detail work. Repair techniques, maintenance rules (no pressure washing, careful foot traffic) and the lift-and-relay reroof option apply to both.

Sometimes — as a cosmetic and maintenance measure, never as a leak repair. Concrete tile becomes more porous as its factory surface weathers, and a quality sealer applied to clean, sound tile can reduce water absorption, slow algae restaining and refresh appearance. That can be worthwhile on an older but structurally sound tile field. What sealing cannot do is fix a leaking roof: leaks come from underlayment, flashings, valleys and vents beneath the tile, and a surface coating on top of the tile never reaches those layers. Be cautious of any pitch that presents sealing as a substitute for repair or as a way to extend the life of failing underlayment. If a roof is leaking, it needs diagnosis and repair first; sealing is an optional finishing step for a roof that is already watertight.

Often, yes. In a lift-and-relay reroof, the existing tile is carefully removed and staged, the old underlayment is torn off, new underlayment and flashings are installed, and serviceable existing tile is reinstalled — with broken tiles replaced by matched salvage or compatible substitutes. This preserves the original tile appearance (valuable when a profile or color is discontinued) and can reduce material cost, though the careful handling adds labor. Whether it makes sense depends on the tile's condition: brittle, widely cracked or delaminating tile is not worth relaying, and some breakage during removal is normal and should be planned for. An honest assessment of tile condition — including expected breakage rates — belongs in any lift-and-relay proposal. The permitting and inspection process for this work is the same as for any roof replacement.