.png)
Florida roofing work is performed under the Florida Building Code and requires licensed contractors, permits and inspections — but the specific requirements for a given project depend on its scope and the jurisdiction, and they change over time. This resource explains the framework so property owners know what to expect and what to verify; it is not a substitute for confirming current requirements with Collier County or a licensed contractor for a specific project.
Contractor Licensing
Roofing in Florida is performed by licensed roofing contractors. A Florida Certified Roofing Contractor is licensed at the state level to perform roofing work; Craft Roofing holds both a Certified General Contractor license (CGC1540219) and a Certified Roofing Contractor license (CCC1336696). Licensing is why permits for roofing work are pulled by the contractor, and verifying a contractor's active license is a basic, worthwhile step for any property owner.
Permits
Roof replacement is permitted work in Collier County. Whether a specific repair requires a permit depends on its scope and the rules in force at the time — minor repairs are treated differently from work replacing substantial roofing areas. Because thresholds can change, the reliable practice is for the contractor to confirm current requirements for the specific scope before work begins. The permit record documents that work was done, when, by whom, and that it passed inspection.
Inspections
Permitted roofing work is inspected at defined stages before the permit is closed. On a reroof these commonly address the roof deck and its fastening, the underlayment before it is covered, and the completed installation — with the exact requirements and sequence set by the jurisdiction and the code in force at the time.
Product Approvals and Wind Requirements
Florida requires roofing products to carry approvals demonstrating they meet applicable standards, including wind-resistance requirements that vary by location and code edition. The right products and attachment for a given roof are determined by these approvals and the wind-load requirements applicable to the site — which is exactly why they should be confirmed against current product approvals rather than assumed.
Insurance and Documentation
Permitted, documented roofing work matters at resale, for insurance and after storms. Keep permits, inspection records, product documentation and photos together as part of the property's history.
A Note on Accuracy
Permit thresholds, fees, inspection procedures, code editions and product-approval requirements are set by the authorities having jurisdiction and change over time. For a current, project-specific answer, verify with Collier County's building department or a licensed roofing contractor.
Where Craft Roofing Is Registered to Work
Beyond the state license, roofing contractors are often separately registered or active in the specific jurisdictions where they work. Craft Roofing is registered and active across Collier County, Lee County, the City of Naples, the City of Marco Island and the City of Bonita Springs — worth checking for any contractor working in your specific city or county.
Permitted Roofing in Collier County
Craft Roofing (Florida Certified General & Roofing Contractor, CGC1540219 & CCC1336696) handles licensing, permitting, product approvals, inspections and documentation for roofing projects throughout Naples, Collier County and Southwest Florida.
Related Questions
Does Collier County require a permit for roof replacement?
Yes. Roof replacement in Collier County is permitted work under the Florida Building Code, and the project is inspected during the process. A licensed contractor pulls the permit and schedules the required inspections as part of the job.
What license should a Florida roofing contractor have?
A Florida roofing contractor performing this type of work should hold a state Certified Roofing Contractor license (or an equivalent Registered/Certified license recognized by the Florida DBPR), which allows licensed work statewide. Craft Roofing holds both a Florida Certified General Contractor license (CGC1540219) and a Florida Certified Roofing Contractor license (CCC1336696). Property owners can verify a contractor's license status directly through the Florida DBPR's online license search.
How does salt air affect roofs near the Gulf?
Salt-laden air accelerates corrosion of exposed metal components — fasteners, flashing, and any coated metal roofing where the coating has been scratched or penetrated — and can degrade certain sealants and finishes faster than inland environments. Homes within the first blocks of the Gulf see this effect most, though salt travels on the wind well beyond the immediate coastline. Choosing corrosion-resistant materials (aluminum over uncoated steel, stainless fasteners) and keeping up with periodic inspection reduces the impact.
Do Florida roofing codes require wind-rated materials?
Yes. The Florida Building Code sets wind-uplift and product-approval requirements for roofing materials and installation methods, and Southwest Florida's wind requirements mean materials and fastening patterns are specified to meet local wind speed ratings, not just generic manufacturer defaults. A licensed contractor selects products with the appropriate product approval for the property's wind zone.
What inspections happen during a permitted roof replacement in Naples?
A permitted reroof in Naples typically involves a dry-in inspection (confirming the underlayment is correctly installed before roofing material goes on) and a final inspection once the roof is complete, in addition to the permit application review itself. Requirements can vary by scope and municipality, and Craft Roofing coordinates these inspections as part of the project.